Aluminum Coil Metal Slitting and Toll Processing - Specialty Metals Suppliers

aluminum 3003 - coil slitting

Alloyed with manganese for higher tensile strength than 1100, it has comparable applications as 1100 yet provides slightly higher strength characteristics.

Silicon Si	Iron Fe	Copper Cu	Manganese Mn	Magnesium Mg	Chromium Cr	Nickel Ni	Zinc Zn	Titanium Ti	Others Each	Total	Aluminum Min
0.6	0.7	0.05-0.2	1.0-1.50				0.10	-	0.05	0.15	Remainder

mechanical property Limits

alloy and temper	specified thickness	tensil strength - ksi		elongation in 2 inches %
		ultimate	yield

	inches	min	max	min	max
3003-0 3003-H12 3003-H14 3003-H16 3003-H18 3003-H19 3003-H112	0.006-0.007 0.008-0.012 0.013-0.031 0.032-0.050 0.051-0.249 0.250-3.000 0.017-0.019 0.020-0.031 0.032-0.050 0.051-0.113 0.114-0.161 0.162-0.249 0.250-0.499 0.500-2.000 0.009-0.012 0.013-0.019 0.020-0.031 0.032-0.050 0.051-0.113 0.114-0.161 0.162-0.249 0.250-0.499 0.500-1.000 0.006-0.019 0.020-0.031 0.032-0.050 0.051-0.162 0.006-0.019 0.020-0.031 0.032-0.050 0.051-0.128 0.006-0.063 0.250-0.499 0.500-2.000 2.001-3.000	14.0 14.0 14.0 14.0 14.0 14.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 24.0 24.0 24.0 24.0 27.0 27.0 27.0 27.0 29.0 17.0 15.0 14.5	19.0 19.0 19.0 19.0 19.0 19.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 23.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 30.0 30.0 30.0 30.0 - - - - - - - -	5.0 5.0 5.0 5.0 5.0 5.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 12.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 21.0 21.0 21.0 21.0 24.0 24.0 24.0 24.0 - 10.0 6.0 6.0	- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -	14 18 20 23 25 23 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 10 1 2 3 4 1 2 3 4 1 8 12 18
• Chemical composition is percent maximum unless shown as a range or a minimum. • Source: Aluminum Standards and Data – The Aluminum Association, Inc. • Information presented as a guide for reference purposes only and is not intended to be used for product design or application.