Specialty Metals Stock Supplier - Aluminum Coil Metal Slitting and Toll Processing

aluminum 3105 - coil slitting

Aluminum Coil Stock Supplier

A wrought alloy generally comparable to 3003 in properties and characteristics. Typically used for building product applications, it can also be used for other industrial applications.

Silicon Si	Iron Fe	Copper Cu	Manganese Mn	Magnesium Mg	Chromium Cr	Nickel Ni	Zinc Zn	Titanium Ti	Others Each	Total	Aluminum Min
0.6	0.7	0.3	0.3-0.8	0.2-0.8	0.2		0.4	0.1	0.05		Remainder

mechanical property Limits

alloy and temper	specified thickness	tensil strength - ksi		elongation in 2 inches %
		ultimate	yield

	inches	min	max	min	max
3105-0 3105-H12 3105-H14 3105-H16 3105-H18 3105-H25	0.013-0.019 0.020-0.031 0.032-0.080 0.017-0.019 0.020-0.031 0.032-0.050 0.051-0.080 0.013-0.019 0.020-0.031 0.032-0.050 0.051-0.080 0.013-0.031 0.032-0.050 0.051-0.080 0.013-0.031 0.032-0.050 0.051-0.080 0.013-0.019 0.020-0.031 0.032-0.050 0.051-0.080	14.0 14.0 14.0 19.0 19.0 19.0 19.0 22.0 22.0 22.0 22.0 25.0 25.0 25.0 28.0 28.0 28.0 23.0 23.0 23.0 23.0	21.0 21.0 21.0 26.0 26.0 26.0 26.0 29.0 29.0 29.0 29.0 32.0 32.0 32.0 - - - - - - -	5.0 5.0 5.0 15.0 15.0 15.0 15.0 18.0 18.0 18.0 18.0 21.0 21.0 21.0 24.0 24.0 24.0 19.0 19.0 19.0 19.0	- - - - - - - - - - - - - - - - - - - - -	16 18 20 1 1 2 3 1 1 2 2 1 2 2 1 1 2 2 3 4 6
• Chemical composition is percent maximum unless shown as a range or a minimum. • Source: Aluminum Standards and Data – The Aluminum Association, Inc. • Information presented as a guide for reference purposes only and is not intended to be used for product design or application.