Aluminum Coil Metal Slitting and Toll Processing

aluminum 5005 - coil slitting

The presence of magnesium creates superb workability, weldability and corrosion resistance for this particular alloy. Where anodizing is needed, 5005 is specified for applications similar to 1100 and 3003.

Silicon Si	Iron Fe	Copper Cu	Manganese Mn	Magnesium Mg	Chromium Cr	Nickel Ni	Zinc Zn	Titanium Ti	Others Each	Total	Aluminum Min
0.3	0.7	0.2	0.2	0.5-1.1	0.10		0.25	0.10	0.05	0.15	Remainder

mechanical property Limits

alloy and temper	specified thickness	tensil strength - ksi		elongation in 2 inches %
		ultimate	yield

	inches	min	max	min	max
5005-0 5005-H12 5005-H14 5005-H16 5005-H18 5005-H32 5005-H34 5005-H36 5005-H38 5005-H39 5005-H112	0.006-0.007 0.008-0.012 0.013-0.019 0.020-0.031 0.032-0.050 0.051-0.113 0.114-0.249 0.250-3.000 0.017-0.019 0.020-0.031 0.032-0.050 0.051-0.113 0.114-0.161 0.162-0.249 0.250-0.499 0.500-2.000 0.009-0.031 0.032-0.050 0.051-0.113 0.114-0.161 0.162-0.249 0.250-0.499 0.500-1.000 0.006-0.031 0.032-0.050 0.051-0.162 0.006-0.031 0.032-0.050 0.051-0.128 0.017-0.019 0.020-0.031 0.032-0.050 0.051-0.113 0.114-0.161 0.162-0.249 0.250-2.000 0.009-0.012 0.013-0.031 0.032-0.050 0.051-0.113 0.114-0.161 0.162-0.249 0.250-0.499 0.500-1.000 0.006-0.007 0.008-0.019 0.020-0.031 0.032-0.162 0.006-0.012 0.013-0.019 0.020-0.031 0.032-0.128 0.006-0.063 0.250-0.499 0.500-2.000 2.001-3.000	15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 24.0 24.0 24.0 27.0 27.0 27.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 23.0 23.0 23.0 23.0 26.0 26.0 26.0 26.0 28.0 17.0 15.0 14.5	21.0 21.0 21.0 21.0 21.0 21.0 21.0 21.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 24.0 27.0 27.0 27.0 27.0 27.0 27.0 27.0 30.0 30.0 30.0 - - - 23.0 23.0 23.0 23.0 23.0 23.0 23.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 29.0 29.0 29.0 29.0 - - - - - - - -	5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 20.0 20.0 20.0 - - - 12.0 12.0 12.0 12.0 12.0 12.0 12.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 18.0 18.0 18.0 18.0 - - - - - - - -	- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -	12 14 16 18 20 21 22 22 2 3 4 6 7 8 9 10 1 2 3 5 6 8 10 1 2 3 1 1 3 3 4 5 7 8 9 10 2 3 4 5 6 7 8 10 1 2 3 4 1 2 3 4 1 8 12 18
• Chemical composition is percent maximum unless shown as a range or a minimum. • Source: Aluminum Standards and Data – The Aluminum Association, Inc. • Information presented as a guide for reference purposes only and is not intended to be used for product design or application.