Aluminum Coil Metal Slitting and Toll Processing

aluminum 5052 - coil slitting

Magnesium gives this alloy its enhanced corrosion resistance, workability, strength and weldability. Typical uses include aircraft fuel tanks, electronic mounting plates and panels, fan blades, refrigeration liners, storm shutters and utensils.

Silicon Si	Iron Fe	Copper Cu	Manganese Mn	Magnesium Mg	Chromium Cr	Nickel Ni	Zinc Zn	Titanium Ti	Others Each	Total	Aluminum Min
0.25	0.4	0.10	0.10	2.2-2.8	0.15-0.35		0.10		0.05	0.15	Remainder

mechanical property Limits

alloy and temper	specified thickness	tensil strength - ksi		elongation in 2 inches %
		ultimate	yield

	inches	min	max	min	max
5052-0 5052-H32 5052-H34 5005-H36 5052-H38 5052-H39 5052-H112 5052-H391	0.006-0.007 0.008-0.012 0.013-0.019 0.020-0.031 0.032-0.050 0.051-0.113 0.114-0.249 0.250-3.000 0.017-0.019 0.020-0.050 0.051-0.113 0.114-0.249 0.250-0.499 0.500-2.000 0.009-0.019 0.020-0.050 0.051-0.113 0.114-0.249 0.250-1.000 0.006-0.007 0.008-0.031 0.032-0.162 0.006-0.007 0.008-0.031 0.032-0.128 0.006-0.063 0.250-0.499 0.500-2.000 2.001-3.000 0.008-0.125	25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 31.0 31.0 31.0 31.0 31.0 31.0 34.0 34.0 34.0 34.0 34.0 37.0 37.0 37.0 39.0 39.0 39.0 41.0 28.0 25.0 25.0 42.0	31.0 31.0 31.0 31.0 31.0 31.0 31.0 31.0 38.0 38.0 38.0 38.0 38.0 38.0 41.0 41.0 41.0 41.0 41.0 44.0 44.0 44.0 - - - - - - - -	9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 23.0 23.0 23.0 23.0 23.0 23.0 26.0 26.0 26.0 26.0 26.0 29.0 29.0 29.0 32.0 32.0 32.0 - 16.0 9.5 9.5 35.0	- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -	- 14 15 16 18 19 20 18 4 5 7 9 11 12 3 4 6 7 10 2 3 4 2 3 4 1 7 12 16 3
• Chemical composition is percent maximum unless shown as a range or a minimum. • Source: Aluminum Standards and Data – The Aluminum Association, Inc. • Information presented as a guide for reference purposes only and is not intended to be used for product design or application.