HomeWhat We DoMetalsRequest a QuoteExcess InventoryContact Us


aluminum coil slitting

Aluminum Coil Stock Supplier
Grades

1100
3003
3105
5005
5052
5182
5252
5457
5657
6061
7021
 
* Other alloys available upon request.
Request a Quote

Capabilities

Gauge: .002 - .170 (inches)                              Width: .250 - 60 (inches)
ID: 8, 12, 16 or 20 (inches)                                OD: 80 (inches) maximum
Coil Weight: 40,000 pound maximum


Standard Tolerances

Width
gauge range
(0.004-0.069)
gauge range
(0.070-0.125)
0.500 - 5.999
6.000 - 8.999
9.000 - 11.99
12.00 - 19.99
20.00 - 60.00
+/- 0.005
+/- 0.005
+/- 0.010
+/- 0.016
Commercial
+/- 0.008
+/- 0.010
+/- 0.010
+/- 0.016
Commercial

Gauge:
0.0829 - 0.072 +/- 0.004
0.0719 - 0.040 +/- 0.003
0.0399 - 0.026 +/- 0.002
0.0259 - 0.011 +/- 0.0015
0.0109 - 0.007 +/- 0.001
0.0069 - 0.004 +/- 0.0005


Camber:
.006-.064 x .500-1" (3/4" in 6')
x 1.01-2" (9/16" in 6')
x 2.01-4" (3/8" in 6')
x 4.01-10" (1/4" in 6')
x over 10" (3/16" in 6')

.065-.125 x 2.01-4" (3/8" in 6')
x 4.01-10" (1/4" in 6')
x over 10" (3/16" in 6')

* Camber is to be determined by placing an 8ft. straight edge against the concave edge of the strip.

* Camber is the greatest deviation of the side edge from a straight line; the measurement being taken on the concave side with a straight edge.


Length:
Under: 0.1874 (inches)
Width: < 48.00 (inches)
Length: < 120 (inches)
Tolerance: (+0.250 / -0.000)
Over: 0.1874 (inches)
Width: > 48.00 (inches)
Length: > 120 (inches)
Tolerance: (+0.500 / -0.000)

Finishes        
Standard Mill
Preferred Mill
1 or 2 Sides Bright
1 or 2 Sides Matte
Anodized
Painted
 
Tempers   
Annealed
1/4 Hard
1/2 Hard
3/4 Hard
Full Hard
.


 

Almetals Home