Brass Coil Metal Slitting and Toll Processing

brass 220 - coil slitting

ASTM Spec Number	Nominal Composition	Density (a)	Module of Elasticity (b)	Electric Conductivity (c)	Thermal Conductivity (d)	Coefficient of Thermal Expansion (e)
B36	Cu 9 Zn 10	.318	17	44	109	10.2

(a)Lbs. per cu in. at 68°F (x 27.68 = gms/cu cm at 20°C)
(b) X 106 PSI, tension (Kgf/mm² = KSI x .7031)
(c) % IACS AT 68°F (20°C) as annealed
(d) BTU•ft. @ 68°F ft²•hr•F (20°C)
(e) Inches/inch/°F x 10-5 from 68°F to 572°F (20°C to 300°C)

	tensile strength	yield strength*	elongation	rockwell b hardness*
	x1000PSI(N/mm²=KSI x 6.895) x1000PSI(Kgf/mm²=KSI x .7031)		nominal % in 2in. (=% in 50 mm.)	Nominal .020" gauge and over
Annealed (TM00/AM) 1/4 Hard (TM01/ ¼ HM) 1/2 Hard (TM02/ ½ HM) 3/4 Hard (TM03) Hard (TM04/HM) Ex Hard (TM05/SHM) Spring (TM06/XHM) Ex Spring (TM08/XHMS)	36-42 40-50 47-57 52 -62 57-66 64-72 69-77 72-80	12 33 47 54 58 63 68 70	47 27 12 6 4 2 1 min 1 max	65F 41 58 64 70 75 78 80

* Yield Strength - x1000PSI(Nominal .2% offset)(N/mm²=KSI x 6.895)
* Yield Strength - x1000PSI(Nominal .2% offset or range)(Kgf/mm²=KSI x .7031)
* Rockwell F, 30T, 15N, or H where noted