Brass Coil Metal Slitting and Toll Processing

brass 226 - coil slitting

ASTM Spec Number	Nominal Composition	Density (a)	Module of Elasticity (b)	Electric Conductivity (c)	Thermal Conductivity (d)	Coefficient of Thermal Expansion (e)
B36	Cu 87 Zn 13	.317	17	40	100	10.3

(a)Lbs. per cu in. at 68°F (x 27.68 = gms/cu cm at 20°C)
(b) X 106 PSI, tension (Kgf/mm² = KSI x .7031)
(c) % IACS AT 68°F (20°C) as annealed
(d) BTU•ft. @ 68°F ft²•hr•F (20°C)
(e) Inches/inch/°F x 10-5 from 68°F to 572°F (20°C to 300°C)

	tensile strength	yield strength*	elongation	rockwell b hardness*
	x1000PSI(N/mm²=KSI x 6.895) x1000PSI(Kgf/mm²=KSI x .7031)		nominal % in 2in. (=% in 50 mm.)	Nominal .020" gauge and over
Annealed (TM00/AM) 1/4 Hard (TM01/ ¼ HM) 1/2 Hard (TM02/ ½ HM) 3/4 Hard (TM03) Hard (TM04/HM) Ex Hard (TM05/SHM) Spring (TM06/XHM) Ex Spring (TM08/XHMS)	37-45 42-52 49-59 55 -65 60 -69 69-77 75-83 78-86	15 32 50 58 62 70 76 78	40 28 19 9 6 4 3 3 max	64F 44 61 68 72 78 81 83

* Yield Strength - x1000PSI(Nominal .2% offset)(N/mm²=KSI x 6.895)
* Yield Strength - x1000PSI(Nominal .2% offset or range)(Kgf/mm²=KSI x .7031)
* Rockwell F, 30T, 15N, or H where noted