Clad Coil Metal Slitting and Toll Processing

clad coil slitting

SS / AL / SS
Bronze / CRS / Bronze
Bronze / SS / Bronze
CRS / AL / CRS
Cu / SS
CuNi / Cu / CuNi

AL / CRS / AL
Brass / CRS / Brass
Brass / SS / Brass
SS / Cu / SS
Ni / SS
Bronze / CRS / Cu

Cu / CRS / Cu
Cu / SS / Cu
Cu / SS / Ni
AL / Cu
AL / CRS / Cu / Ni
AL / CRS

Request a Quote

Gauge: .002-.125 (inches) *Dependant upon metal combinations
Width: .250-32.00 (inches) *Dependant upon metal combinations
ID : 8, 12, 16 or 20 (inches)
OD: 60 (inches) maximum per application
Coil Weight: 5,000 pounds standard per application

Gauge:

0.0829 - 0.072 +/- 0.004
0.0719 - 0.040 +/- 0.003
0.0399 - 0.026 +/- 0.002

0.0259 - 0.011 +/- 0.0015
0.0109 - 0.007 +/- 0.001
0.0069 - 0.004 +/- 0.0005

Camber:

*Camber is to be determined by placing and 8ft. straight edge against the concave edge of the strip

*Camber is the greatest deviation of the side edge from a straight line; the measurement being taken on the concave side with a straight edge.

Length:

Flat cut lengths run from 6 -8 feet. Other lengths in this range can be cut as multiples of the 6 -8 feet in order to avoid scrap.

Standard Mill
Preferred Mill
1 or 2 Sides Bright
1 or 2 Sides Matte

Annealed
1/4 Hard
1/2 Hard
3/4 Hard
Full Hard

Bearings
Gaskets
Battery Cells
Lead Frames
Springs

Transition Joints
Contact Arms
Heat Shields
Heat Exchangers
Wire/Cable Shielding