Copper Coil Metal Slitting and Toll Processing

copper 102 - coil slitting

ASTM Spec Number	Nominal Composition	Density	Module of Elasticity (a)	Electric Conductivity (b)	Thermal Conductivity (c)	Coefficient of Thermal Expansion (d)
B152	Cu-Min. 99.95	.323	17	101	226	9.8

(a) X 106 PSI, tension (Kgf/mm² = KSI x .7031)
(b) % IACS AT 68°F (20°C) as annealed
(c) BTU•ft. @ 68°F ft²•hr•F (20°C)
(d) Inches/inch/°F x 10-5 from 68°F to 572°F (20°C to 300°C)

	tensile strength	yield strength*	elongation	rockwell b hardness*
	x1000PSI(N/mm²=KSI x 6.895) x1000PSI(Kgf/mm²=KSI x .7031)		nominal % in 2in. (=% in 50 mm.)	Nominal .020" gauge and over
Annealed (TM00/AM) 1/4 Hard (TM01/ ¼ HM) 1/2 Hard (TM02/ ½ HM) 3/4 Hard (TM03) Hard (TM04/HM) Ex Hard (TM05/SHM) Spring (TM06/XHM) Ex Spring (TM08/XHMS)	26-38 34-42 37-46 41-50 43-52 47-56 50-58 52 min	10 32 37 43 45 50 52 51 min	35 23 20 14 9 4 3 3 max	- 72F 83F 86F 89F 91F 94F 92 min F

* Yield Strength - x1000PSI(Nominal .2% offset)(N/mm²=KSI x 6.895)
* Yield Strength - x1000PSI(Nominal .2% offset or range)(Kgf/mm²=KSI x .7031)
* Rockwell F, 30T, 15N, or H where noted