facebook_icon
Metals > Aluminum > 1050 > H22

Aluminum 1050 H22

MECHANICAL PROPERTY LIMITS
Specified Thickness(in) Tensile Strength - KSI Elongationin 2 inches %
Ultimate Yield
Min Max Min Max
0.008 - 0.020 12.3 18.1 8 - 4
0.020 - 0.059 12.3 18.1 8 - 5
0.059 - 0.118 12.3 18.1 8 - 6
CHEMICAL COMPOSITION LIMITS (%)
Si
Silicon
Fe
Iron
Cu
Copper
Mn
Manganese
Mg
Magnesium
Cr
Chromium
Ni
Nickel
Zn
Zinc
Ti
Titanium
Others
Each
Total
 
Total
Aluminum Min
0.25 0.40 0.05 0.05 0.05 - - 0.05 0.03 0.03 - 99.50
  • Chemical composition is percent maximum unless shown as a range or a minimum.
  • Source: Per DIN Specs
  • Information presented as a guide for reference purposes only and is not intended to be used for product design or application.
Slitting Capabilities
Gauge Range
.004" to .187" (.102 mm to 4.750 mm)
Width Range
.250" to 60" (6.365 mm to 1524 mm)
ID
8, 12, 16 or 20 (inches)
OD
78" maximum
Coil Weight
40,000 lbs maximum
Cut-to-Length Capabilities
Gauge Range
.015 to .060 (.381 mm to 1.524 mm)
Width Range
8” - 48” (203 mm to 1.219 mm)
Length Range
12” to 144” (305 mm to 3.658 mm)