facebook_icon
Metals > Aluminum > 6061

6061 Aluminum Coil Stock

UNS A 96061

6061 has good mechanical properties, exhibits good weldability, is corrosion resistant, and is very commonly extruded.  It is one of the most common alloys of aluminium for general-purpose use. It is commonly available in pre-tempered grades such as 6061-O (annealed), tempered grades such as 6061-T6 (solutionized and artificially aged) and 6061-T651 (solutionized, stress-relieved stretched and artificially aged).  Uses include engineering and structural applications, boats, furniture and transportation equipment.

Slitting Capabilities
Gauge Range
.004" to .190" (.102 mm to 4.826 mm)
Width Range
.250" to 60" (6.365 mm to 1524 mm)
ID
8, 12, 16 or 20 (inches)
OD
78" maximum
Coil Weight
40,000 lbs maximum
Cut-to-Length Capabilities
Gauge Range
.015 to .060 (.381 mm to 1.524 mm)
Width Range
8” - 48” (203 mm to 1.219 mm)
Length Range
12” to 144” (305 mm to 3.658 mm)
MECHANICAL PROPERTY LIMITS
Temper Specified Thickness(in) Tensile Strength - KSI Elongationin 2 inches %
Ultimate Yield
Min Max Min Max
O 0.006 - 0.007 - 22 12 12 10
O 0.008 - 0.009 - 22 12 12 12
O 0.010 - 0.020 - 22 12 12 14
O 0.021 - 0.128 - 22 12 12 16
O 0.129 - 0.499 - 22 12 12 18
O 0.500 - 1.000 - 22 - - 18
O 1.001 - 3.000 - 22 - - 16
T4 0.006 - 0.007 30 - - - 10
T4 0.008 - 0.009 30 - - - 12
T4 0.010 - 0.020 30 - - - 14
T4 0.021 - 0.249 30 - - - 16
T42 0.006 - 0.007 30 - - - 10
T42 0.008 - 0.009 30 - - - 12
T42 0.010 - 0.020 30 - - - 14
T42 0.021 - 0.249 30 - - - 16
T42 0.250 - 1.000 30 - - - 18
T42 1.001 - 3.000 30 - - - 16
T451 0.250 - 1.000 30 - - - 18
T451 1.001 - 3.000 30 - - - 16
T6 and T62 0.006 - 0.007 42 - - - 4
T6 and T62 0.008 - 0.009 42 - - - 6
T6 and T62 0.010 - 0.020 42 - - - 8
T6 and T62 0.021 - 0.249 42 - - - 10
T62 and T651 0.250 - 0.499 42 - - - 10
T62 and T651 0.500 - 1.000 42 - - - 9
T62 and T651 1.001 - 2.000 42 - - - 8
T62 and T651 2.001 - 4.000 42 - - - 6
T62 and T651 4.001 - 6.000 42 - - - 6
CHEMICAL COMPOSITION LIMITS (%)
Si
Silicon
Fe
Iron
Cu
Copper
Mn
Manganese
Mg
Magnesium
Cr
Chromium
Ni
Nickel
Zn
Zinc
Ti
Titanium
Others
Each
Total
 
Total
Aluminum Min
0.4 - 0.8 0.7 0.15 - 0.4 0.15 0.8 - 1.2 0.04 - 0.35 - 0.25 0.15  0.05 0.15 Remainder
  • Chemical composition is percent maximum unless shown as a range or a minimum.
  • Source: Aluminum Standards and Data – The Aluminum Association, Inc.
  • Information presented as a guide for reference purposes only and is not intended to be used for product design or application.
  • Aluminum Association
     wikipedia.org
Almetals is a world-class specialty aluminum supplier and metal supplier slitter and distributor for industries such as stamping, roll forming, and tube producers. Our coil products include: aluminum, brass & copper, clad metals, cold rolled, fin stock, and coated & stainless steels.
51035 Grand River Avenue
Wixom
Michigan
48393
United States