facebook_icon
Metals > Aluminum > 5182

5182 Aluminum Coil Stock


Weldability and resistance to corrosion is considered favorable. This type of alloy is used for body panel sheet because its formability is very good. Resistance to corrosion is good except when material is held at elevated temperatures for long periods of time.

Slitting Capabilities
Gauge Range
.004" to .190" (.102 mm to 4.826 mm)
Width Range
.250" to 60" (6.365 mm to 1524 mm)
ID
8, 12, 16 or 20 (inches)
OD
78" maximum
Coil Weight
40,000 lbs maximum
Cut-to-Length Capabilities
Gauge Range
.015 to .060 (.381 mm to 1.524 mm)
Width Range
8” - 48” (203 mm to 1.219 mm)
Length Range
12” to 144” (305 mm to 3.658 mm)
MECHANICAL PROPERTY LIMITS
Temper Tension Hardness Shear Fatigue Modulus
Strength Elongation % Rockwell B Ultimate shearing strength Endurance Limit Modulus Of Elasticity X 10?
Ultimate Yield 1.6mm thick specimen 50mm
mpa ksi mpa (ksi) mpa (ksi) mpa (ksi)
O 275 (40) 130 (19) 21 70 165 (24) 140 (20) 71 (10.3)
CHEMICAL COMPOSITION LIMITS (%)
Si
Silicon
Fe
Iron
Cu
Copper
Mn
Manganese
Mg
Magnesium
Cr
Chromium
Ni
Nickel
Zn
Zinc
Ti
Titanium
Others
Each
Total
 
Total
Aluminum Min
0.2 0.35 0.15 0.2 - 0.5 4.0 - 5.0 0.1 - 0.25 0.1  0.05 0.15 Remainder
  • Chemical composition is percent maximum unless shown as a range or a minimum.
  • Source: Aluminum Standards and Data – The Aluminum Association, Inc.
  • Information presented as a guide for reference purposes only and is not intended to be used for product design or application.
Almetals is a world-class specialty aluminum supplier and metal supplier slitter and distributor for industries such as stamping, roll forming, and tube producers. Our coil products include: aluminum, brass & copper, clad metals, cold rolled, fin stock, and coated & stainless steels.
51035 Grand River Avenue
Wixom
Michigan
48393
United States