HOMEWHAT WE DOMETALSREQUEST A QUOTEEXCESS INVENTORYCONTACT US


stainless steel 316 - coil slitting

Stainless Steel Coil Stock Supplier
316 UNS S31600

An austenitic chromium-nickel molybdenum stainless and heat-resisting steel, Type 316 has an excellent corrosion resistance particularly against pitting versus other chromium-nickel steels, especially when exposed to different chemicals. These corrodents consist of brine solutions, seawater, and similar salts and acids. This alloy deep draws well and is easily welded, although carbide precipitation may occur when slowly cooled through the temperature range of 800?-1650?F. High strength and the resistance to creep at elevated temperatures characterize type 316.

Applications include builder’s hardware, chemical processing equipment, fabricated parts subjected to reducing atmospheres, fertilizer components, exhaust manifolds, turbine and jet engine parts.

chemical composition limits (%)

Carbon
C
Manganese
Mn
Phosphorus
P
Sulfur
S
Silicon
Si
Chromium
Cr
Nickel
Ni
Molybdemum
Mo
0.08
2.00
0.045
0.030
1.00
16.00-18.00
10.00-14.00
2.00-3.00


Representative mechanical property

condition
tensile strength
yield strength
elongation
rockwell
 
KSi
MPa
ksi
mpa
in 2 inches %
    
Annealed
75
(515)
30
(205)
40
B-95 max.
  
 
 
 
*Minimum
Chemical composition is percent maximum unless shown as a range or a minimum.
Information presented as a guide for reference purposes only and is not intended for product design or application.
 
Alabama, Florida,Georgia,Illinois,Indiana,Michigan,Mississippi,Ohio,Pennsylvania,North Carolina,New Jersey,New York,South Carolina,Tennessee,Virginia,Wisconsin
Privacy Policy
Copyright © 2011 Almetals  /  All Rights Reserved.
SEO Consulting/Services by JC Whelan - Brighton Mi
Phone  /  800-968-7730
E-Mail  /  Information Request